ReeFlowers BioClean products help clean aquarium water using natural biological methods, allowing benign bacteria to consume and remove the nitrate and phosphate that pollute aquariums.
BioClean I is very effective at reducing the Nitrate (NO3) and Phosphate (PO4) levels in both saltwater and freshwater aquariums.
Instruction For Use
For proper biological filtration, ReeFlowers BioClean products should be used as a trio set. After testing the aquarium water on a weekly basis, the product to be used should be determined using the following table. (Suggested values are per 100 lt of water.)
|Bio Clean I||Bio Clean II||Bio Clean III|
|5 ml/day||5 ml/day||5 ml/day|
|NO3>2 ppm||NO3>2 ppm||NO3<2 ppm|
|PO4>0.04 ppm||PO4<0.04 ppm||PO4>0.04 ppm|
When BioClean products are used, nitrate and phosphate levels of water should be monitored by testing the water once a week. If the levels of nitrate and phosphate are over 10 ppm and 0.20 ppm, respectively, then the daily dosage may be increased to 10 ml. BioClean I should not be added if the levels of nitrate and phosphate are below 2 ppm or 0.04 ppm, respectively. The devices (UV Filter, Ozonizer etc.) which affect the beneficial bacteria population are not recommended to use in the tanks where ReeFlowers BioClean products are used.
If the recommended dosage is exceeded or if convenient biological conditions form, then the bacteria population may suddenly explode, creating cloudy water. This will not harm your living organisms but if this situation occurs, discontinue product use until the cloudiness disappears. Filtering equipment should not be turned off since the oxygen needs are now greater. The cloudiness should disappear within 48 hours on average. You may continue to use the product once the water returns to normal.
The devices (UV Filter, Ozonizer etc.) which affect the beneficial bacteria population are not recommended to use in the tanks where ReeFlowers BioClean products are used.